Promise Technology VTrak M610i User Manual

Chapter 5: Management with the CLU
165
Changing a VLAN Entry
To change a VLAN entry:
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight VLAN and press Enter.
3. Highlight a VLAN entry from the list and press Enter.
4. If you want to change the tag number, highlight VLAN Tag, press the
backspace key to erase the current value, then enter a new value.
Use the numbers 2 though 4094.
5. If you want to change the IP address, highlight IP Address, press the
backspace key to erase the current value, then enter a new value.
6. If you want to change the TCP port number, highlight TCP Port Number,
press the backspace key to erase the default value, then enter a new value.
7. If you want to change the subnet mask, highlight Subnet Mask, press the
backspace key to erase the current value, then enter a new value.
8. Highlight Jumbo Frame and press the spacebar to toggle between Enabled
and Disabled.
9. Highlight Member Interface and press the spacebar to toggle through the
choices.
10. Press Ctrl-A to save your settings.
Deleting a VLAN Entry
To delete a VLAN entry:
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight VLAN and press Enter.
3. Highlight a VLAN from the list and press the spacebar to mark it with an
asterisk (*).
4. Highlight Delete Marked Entries and press Enter.
5. Press Y to confirm the deletion.
Viewing Link Aggregation Entries
To view the current Link Aggregation entries:
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight Link Aggregation and press Enter.
The list of Link Aggregation entries appears.

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English