Promise Technology VTrak M610i User Manual

VTrak M610i, M310i, M210i Product Manual
174
Working with the Event Viewer
The Event Viewer displays log of subsystem events. Events are classified as:
• Runtime Events – A list of and information about the 1023 most recent
runtime events recorded since the subsystem was started
• NVRAM Events – A list of and information about most important events over
multiple subsystem startups. NVRAM events are stored in non-volatile
memory
Working with the Event Viewer includes the following functions:
• Viewing Runtime Events (page 174)
• Clearing Runtime Events (page 174)
• Viewing NVRAM Events (page 174)
• Clearing NVRAM Events (page 175)
Viewing Runtime Events
To display Runtime Events:
1. From the Main Menu, highlight Event Viewer and press Enter.
The log of Runtime Events appears. Events are added to the top of the list.
Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – (lowest to highest) Information, Warning, Minor, Major,
Critical and Fatal
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
2. Press the up and down arrow keys to scroll through the log.
Clearing Runtime Events
To clear the Runtime Event log:
1. From the Main Menu, highlight Event Viewer and press Enter.
2. Highlight Clear Runtime Event Log and press Enter.
3. Press Y to confirm.
Viewing NVRAM Events
This screen displays a list of and information about 63 most important events
over multiple subsystem startups.

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English