Promise Technology VTrak M610i User Manual

VTrak M610i, M310i, M210i Product Manual
182
List of User Privileges
• View – Allows the user to see all status and settings but not to make any
changes
• Maintenance – Allows the user to perform maintenance tasks including
Rebuilding, PDM, Media Patrol, and Redundancy Check
• Power – Allows the user to create (but not delete) disk arrays and logical
drives, change RAID levels, change stripe size; change settings of
components such as disk arrays, logical drives, physical drives, and the
controller.
• Super – Allows the user full access to all functions including create and
delete users and changing the settings of other users, and delete disk arrays
and logical drives. The default “administrator” account is a Super User.
Changing a User’s Password
Each user can change their own password. A Super user can change other
user’s passwords. To change a user’s password:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight User Management and press Enter.
3. Highlight a User in the list and press Enter.
4. Highlight Change Password... and press Enter.
5. Highlight New Password and type the password.
6. Highlight Retype Password and type the password again to verify.
7. Press Ctrl-A to save the password.
Changing a User’s Display Name and Email Address
Each user can change their display name and email address. To change a
display name or email address:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight User Management and press Enter.
3. Highlight a User in the list and press Enter.
4. Highlight Display Name and press Enter.
5. Highlight the items you want and press the backspace key to erase the
current value, then type the new value:
•User name
• Email address
6. Press Ctrl-A to save the settings.

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English