Chapter 4: Management with WebPAM PROe
53
Also see “Predictive Data Migration (PDM)” on page 238.
To r u n P D M :
1. In Tree View, click the Subsystem icon.
2. In Management View, click the Background Activities tab and select Start
Media Patrol from the dropdown menu.
3. In the next screen, select the Source and Target physical drives.
The suspect physical drive is the source. The replacement physical drive is
the target.
4. Click the Start button.
Viewing Scheduled Activities
To view scheduled activities for this subsystem:
1. Click the Subsystem icon Tree View.
2. Click the Scheduler tab in Management View.
Scheduling an Activity
To set a scheduled activity for this subsystem:
1. Click the Subsystem icon Tree View.
2. From the dropdown menu on the Scheduler tab, choose an item:
• Media Patrol. See “Running Media Patrol” on page 52
• Redundancy Check. See “Running Redundancy Check” on page 122
• Battery Reconditioning. See “Reconditioning a Battery” on page 98
• Spare Drive Check. See “Running Spare Check” on page 128
3. In the Scheduler dialog box, check the Enable This Schedule box.
4. Select a start time (24-hour clock).
5. Select a Recurrence Pattern.
• Daily – Enter the number of days between events.
• Weekly – Enter the number of weeks between events and select which
days of the week.
• Monthly – Select a calendar day of the month (1 – 31).
If you select a higher number than there are days in the current month, the
actual start date will occur at the beginning of the following month.
Or, select a day of the week and select the first, second, third, fourth, or last
occurrence of that day in the month.
Then, select the months in which you want the activity to occur.
6. Select a Range of Occurrence.
To Next Page
Loading...
Need help?
General
