Promise Technology VTrak M610i User Manual

Chapter 4: Management with WebPAM PROe
55
• Expiration Time – Amount of time left until the lock automatically
releases.
• Expire At Time – The date and time when the lock will automatically
release.
Setting the Lock
The lock prevents other sessions (including by the same user) from making a
configuration change to the controller until the lock expires or a forced unlock is
done.
You can set the lock to last from one minute to one day. To set the lock for this
subsystem:
1. Click the Subsystem icon Tree View.
2. Click the Lock tab in Management View.
3. Click the Lock option.
4. Enter a time interval between 1 and 1440 minutes (one day) that you want
the lock to stay active.
5. Click the Submit button.
Renewing the Lock
The lock prevents other sessions (including by the same user) from making a
configuration change to the controller until the lock expires or a forced unlock is
done.
Renewing the lock extends the period of time the controller remains locked. To
renew an existing lock for this subsystem:
1. Click the Subsystem icon Tree View.
2. Click the Lock tab in Management View.
3. Click the Renew option.
4. Enter a time interval between 1 and 1440 minutes (one day) that you want
the lock to stay active.
The renew time replaces the previous Expiration Time.
5. Click the Submit button.
Releasing the Lock
The lock prevents other sessions (including by the same user) from making a
configuration change to the controller until the lock expires or a forced unlock is
done.

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English