Chapter 6: Maintenance
205
Figure 2. Replacing a M310i/M210i power supply
This completes the power supply replacement procedure.
Replacing a Cooling Unit Fan or Blower
The fan or blower in each cooling unit is replaced as an individual part. No tools
are required for this procedure.
To replace a fan or blower:
1. Verify that the Fan LED is amber or red.
Figure 3. Fan LED (left: M610i, right: M310i/M210i)
2. Press the release button and pull the handle downward. See Figures 4
and 5.
3. Pull the cooling unit out of the VTrak enclosure.
Fan LED
Fan LED
To Next Page
Loading...