Promise Technology VTrak M610i User Manual

VTrak M610i, M310i, M210i Product Manual
76
Managing Software Services
Software Services include the following functions:
• Making Email Settings (page 76)
• Making SLP Settings (page 77)
• Making Web Server Settings (page 77)
• Making Telnet Settings (page 79)
• Making SNMP Settings (page 79)
• Making CIM Settings (page 81)
• Making Netsend Settings (page 82)
Making Email Settings
The Email sends notification messages to users. See Setting-up User Event
Subscriptions (page 58).
To make Email service settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Email Setting link in Management View.
4. Enter the IP address for your SMTP server.
5. Enter server port number for your SMTP server.
25 is the default.
6. Select Yes to enable SMTP authentication or No to Yes.
7. If you selected Yes for SMTP authentication, enter a Username and
Password in the fields provided.
8. Enter an Email sender address (example: RAIDmaster@mycompany.com).
9. Enter an Email subject (example: VTrak Status).
10. Click the Submit button.
Sending a Test Message
To send one test message to the User currently logged into WebPAM PROe:
1. Under Test Email, check the “Send A Test Email” box.
2. Click the Submit button.
If you do not receive the Test Email message, see your Network Administrator for
assistance with the mail server setup, email accounts, and other issues.
Changing the Startup Setting
1. Under Startup Type:

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English