VTrak M610i, M310i, M210i Product Manual
6
data transition. Bad Sector Mapping, Media Patrol, SMART, Hard/Soft Reset to
recover HD from bad status, HD Power-control to recover HD from hung status.
Array Error Recovery: Data recovery from bad sector or failed HD for redundant
RAID, RAID 5/6 inconsistent data Prevent (Write Hole Table), Data content Error
Prevent (Read/Write Check Table) NVRAM event logging.
SCSI Commands: Supports extensive SCSI command set equivalent to SCSI/FC
hard disk drives. Variable sector size (512 byte to 4 KB) to break OS 2TB
limitation. 16 byte CDB support for 64-bit LBA addressing.
Management
Supported Operating Systems: Windows 2000 Server, Windows 2003 Server,
Windows XP, Linux (Red Hat, SuSE), Macintosh OS X, Solaris.
Management Tools: WebPAM PROe via out-of-band Ethernet. OS independent,
localized in multiple languages, SSL Security support. Command Line Interface
(CLI) and Command Line Utility (CLU) via DB9 Serial Port or Telnet.
Standard Management Protocols: SNMP, WBEM/CIM
RAID Creation: Automatic, Express, and Advanced configuration support for
novice to skilled users.
Management Interfaces: WebPAM PROe, CLU, CLI, audible (buzzer) and visible
(LEDs) alarms.
Management Protocols: Embedded web server and management support—no
host agent needed. Ethernet, DB9 serial port, SNMP, SSL, Telnet, Email.
Specifications
Current (maximum): 8 A @ 100 VAC or 4 A @ 240 VAC Current rating with two
power cords.
Power Consumption: 73 W (not including disk drives).
Power Supply: M610i, 400 W; M310i, 360 W; M210i, 260 W
Dual power supplies, 100-240 VAC auto-ranging, 50-60 Hz, dual hot swap and
redundant with PFC, N+1 design.
Operating Temperature: 5° to 40°C operational (-40° to 60°C non-operational)
Relative Humidity: Maximum 95 percent.
Vibration: Random, 0.21 grms, 5-500Hz, 30 Mins, X, Y, Z axis.
To Next Page
Loading...
Need help?
General
