VTrak M610i, M310i, M210i Product Manual
138
Managing the Controllers
Controller Management includes the following functions:
• Viewing Controller Information (page 138)
• Making Controller Settings (page 138)
• Locating the Controller (page 139)
Viewing Controller Information
Controller Management includes information, settings and statistics.
To access Controller Management:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Controller Management and press Enter.
3. Highlight the controller you want and press Enter.
Basic Controller information displays.
To access additional controller information, highlight Advanced Information and
press Enter.
To access controller statistics, highlight Controller Statistics and press Enter.
Making Controller Settings
An alias is optional. To set an Alias for this controller:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Controller Management and press Enter.
3. Highlight the controller you want and press Enter.
4. Highlight Controller Settings and press Enter.
5. Make the following settings as required:
• Type and alias into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between words
and underscore. An alias is optional.
• Highlight Coercion and press the spacebar to toggle between Enable
and Disable.
• Highlight Coercion Method and press the spacebar to toggle through:
GB Truncate – Reduces the capacity to the nearest 1 GB boundary
10 GB Truncate – Reduces the capacity to the nearest 10 GB boundary
Grp (group) Rounding – Uses an algorithm to determine truncation.
Results in the maximum amount of usable drive capacity
Table Rounding – Applies a predefined table to determine truncation
To Next Page
Loading...
Need help?
General
