Promise Technology VTrak M610i User Manual

Chapter 8: Troubleshooting
259
Host-interface controller
has encountered an
unrecoverable error
Restart the VTrak. See page 90.
Host-interface controller
has received an abort-
task/ abort task set/clear
task set command.
Result of user action. Normal.
Host-interface controller
has received an clear
ACA command.
Result of clearing an auto contingent alliance
condition. If this message appears repeatedly,
contact Technical Support. See page 285.
Host-interface controller
has received a LUN reset
command.
Result of user action. Normal.
Host-interface controller
has received a bus reboot
The VTrak rebooted itself. If this message appears
repeatedly, contact Technical Support. See page 285.
Host-interface controller
has encountered an
unknown error
An unidentified error occurred. If this message
appears repeatedly, contact Technical Support. See
page 285.
Host-interface controller
has encountered a
system error
A VTrak system error occurred. If this message
appears repeatedly, contact Technical Support. See
page 285.
Host-interface controller
has encountered a fatal
error
Restart the VTrak. See page 90. If this message
appears repeatedly, contact Technical Support. See
page 285.
Host-interface controller
settings have changed
Result of user action. Normal.
iSCSI
iSCSI link is up iSCSI link connected and ready. Normal.
iSCSI link is down iSCSI link disconnected or otherwise not working.
Logical Drive
Logical drive initialization
has started
Result of user action. Normal.
Logical drive initialization
has completed
Logical drive is ready to use. Normal.
Logical drive initialization
has paused
Initialization paused because of user intervention,
schedule or a higher priority background activity.
Reported Event Corrective Action

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English