Promise Technology VTrak M610i User Manual

VTrak M610i, M310i, M210i Product Manual
266
Redundancy Check is
stopped
Redundancy Check stopped because of user
intervention, schedule or the logical drive was deleted
or went critical or offline.
Redundancy Check is
aborted due to internal
error
System resources are low. Reduce system load or
restart the VTrak. See page 90.
Redundancy Check
encountered inconsistent
block(s)
Check the logical drive’s inconsistent block table. See
page 123. Rebuild the disk array if necessary. See
page 114.
Redundancy Check task
is queued
Redundancy Check has been set manually or by
schedule.
Redundancy Check task
is stopped internally
The logical drive is offline. See page 269.
Resource
Resource is NOT
available
System resources are low. Reduce system load or
restart the VTrak. See page 90.
Spare Check
Spare check started on
the given spare drive
Result of settings or user action. Normal.
Spare check completed
successfully on the given
spare drive
Normal.
Spare Drives
Physical disk assigned as
global spare
Result of settings or user action. Normal.
Physical disk is no longer
assigned as global spare
Result of settings or user action. Normal.
Global Spare has been
deleted
Result of settings or user action. Normal.
Physical disk assigned as
dedicated spare
Result of settings or user action. Normal.
Physical disk is no longer
assigned as dedicated
spare
Result of settings or user action. Normal.
Dedicated Spare has
been deleted
Result of settings or user action. Normal.
Reported Event Corrective Action

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English