Promise Technology VTrak M610i User Manual

VTrak M610i, M310i, M210i Product Manual
78
To make Web Server settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Web Server Setting link in Management View.
4. Enter the HTTP Port number.
80 is the default.
5. Enter Session Time Out interval.
This setting causes WebPAM PROe to timeout after a period of inactivity. 24
minutes is the default. The range is 1 to 1440 minutes (one day).
6. If you want to use a secure connection, check the Enable SSL box.
7. If you checked the Enable SSL box, enter a HTTPS Port number.
443 is the default.
8. If you want to download a SSL Certificate, check the Download Certificate
box.
9. If you checked the Download Certificate box, enter the Certificate filename
or click the Browse... button to locate it.
10. Click the Submit button.
11. Click OK in the confirmation box to restart the Web Server service with your
changes.
Changing the Startup Setting
1. Under Startup Type:
• Click the Automatic option to start the service automatically during
system startup. Recommended.
• Click the Manual option to start the service manually (the service does
not start during system startup).
2. Click the Submit button.
Stopping Web Server service
To stop the Web Server service:
1. Click the Stop button.
2. Click OK in the confirmation box.

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English