Information abort
saved measurement
Detailed description in ch. 24.10 of the user manual
Ingredient weight
entered manually
Detailed description in ch. 24.11 of the user manual
26. WORKING MODES – PARTS COUNTING
Parts counting is working mode allowing to count pieces on the basis of the
standard unit mass of a single piece set on the scale or fetched from the
database.
Caution:
If parts counting is performed in an additional container it should be tarred.
26.1. Starting the working mode
Procedure:
• While in the main window press
in the top bar, then you will
see a submenu <Working Modes> comprising a list of modes,
• Choose <
Parts counting >, program automatically returns
to the main window displaying icon
in the top bar,
• Measuring unit is automatically changed to „pcs”, special on-screen
buttons are activated:
Counting pieces: Insert unit mass
Counting pieces: Estimate unit mass
Counting pieces: Ascribe standard
26.2. Local settings of the working mode
Local settings of the working mode < Parts counting > are accessible
on pressing a hot key <
Local parameters>:
To Next Page
Loading...
