Platform 2:
Icon Step Value Description
1. [CF]
Flags
condition
Signal flag 1 – „1”
Checking condition, whether signal flag 1 is set to value
“1” – i.e. checking whether desired part of the process
has been already realized on the weighing platform no.
1. If Yes, then dosing process on the weighing platform
no. 2 shall start.
Tare Tarring the weighing platform no. 2
3. [TI]
Delay
[5s] Open valve
Water
Pending for opening main valve of the container with
“Water”
Automatic
2 kg [Water]
Automatic dosing of ingredient “Water” to obtain 2 kg
mass in single-step dosing mode – Output 6 controls
the dosing valve (set for Water in Products database)
6. [TI]
Delay
[5s] Close valve
Water
Pending for closing the main valve of the container
“Water”
7. [O]
Outputs
Output 12 – „1”
Output 12 takes high status (“1”) – signal confirming
carrying out the dosing process on the weighing
platform no. 2 is lit up
8. [F] Set
flags
Signal flag 1 – „1”
Signal flag 2 – „1”
Setting the characteristic point of the process, which is
a condition for carrying out part of the process on the
weighing platform no. 1
8. [TI]
Delay
[10s] Dosing
completed
Displaying a text message on the indicator confirming
completion of dosing process
An instance of mixed dosing (manual and automatic) has been extended by
signalling its corresponding phases to present the possibilities of the working
mode <Dosing>.
28.7. Reporting of completed dosing processes
On completing each dosing process, the indicator automatically generates
a report on that process.
Caution:
Submenu: “
Devices / Printer / Printouts / Dosing
report printout template” enables optional modifying of the report
template (see ch. 16.2.3 of this user manual).
To Next Page
Loading...
