RADWAG PUE HY10 - Reports Accessibility; Configuration of a Lot Number; Configuration of a Batch Number

196
35.1.1. Reports accessibility
Submenu < Reports accessibility> allows for declaration of reports that
are to be accessible for the user.
Procedure:
• Enter submenu <
Reports> according to ch. 35 of this manual,
• Select < Reports accessibility> to view a list of reports with the
accessibility attribute.
Where:
- Accessible report
-
Inaccessible report
35.1.2. Configuration of a lot number
Procedure:
• Enter submenu: „ Reports / Reports configuration”
according to ch. 35 of this manual,
• Select < Lot number> and carry out the configuration.
List of data definable for a lot number:
Name
Change of the lot number name
Template
Lot number template, allows using variables that are
intended for a printout
35.1.3. Configuration of a batch number
Procedure:
• Enter submenu: „ Reports / Reports configuration”
according to ch. 35 of this manual,
• Select < Batch number> and carry out the configuration.