RADWAG PUE HY10

253
40.4. Module for an additional platform – DP4
The module increases functionality of PUE HY10 indicators, with it an
additional platform can be supported. The module is intended to be mounted
inside the indicator. For a weighing indicator featuring DP4 module (384Rxxxx)
the additional platform is connected via cable gland mounted on a housing
cover.
40.4.1. DP4 module: technical specifications
Working temperature
-10°C ÷ 40°C
OIML
III
Verification units quantity
6000
Max input signal
19,5mV
Max voltage per verification unit
3,25µV
Min voltage per verification unit
0,4µV
Min impedance of load cell
50 Ω
Max impedance of load cell
1200 Ω
Load cell power supply
5V
Load cells wiring
4 or 6 wires + shield
Multirange function
YES
40.4.2. Colours of weighing platform signal wires
RADWAG
markings
Colour
Markings of connectors on
RADWAG A/D converter boards
+INPUT brown +5V
-INPUT green AGND
+OUTPUT yellow +IN
- OUTPUT white -IN
+SENSE grey +REF
- SENSE pink - REF
SHIELD
yellow-green
Refer to shield wiring rules