21.6. Screen timeout
The user can specify how much time it shall take before sleep mode activates.
By default the value is set to 0[s] (parameter inactive).
Procedure:
• Enter submenu < Others> according to ch. 21 of this manual.
• Select <
Screen timeout> submenu, <Screen timeout> editing
window with an on screen keyboard is displayed.
• Enter required time value in [s] and press button to confirm.
21.7. Log out automatically when time elapses
At a user disposal there is an option of automatically performed log out
operation, carried out upon specified time interval given in [min].
By default the value is 0 [min] (inactive parameter).
Procedure:
• Enter < Others> submenu according to ch. 21 of this manual.
• Select < Log out automatically when time elapses> parameter,
respective window opens, an on-screen keyboard is displayed.
• Enter specified value, use [min] unit, and press
to confirm.
Caution:
Function activates upon specified time interval provided that:
• Home screen is operated,
• The indication is zero.
With the above conditions met, the logged in user gets logged out
automatically, the following message is displayed:
<
Operator logged out automatically>.
To Next Page
Loading...
