RADWAG PUE HY10 - TECHNICAL PARAMETERS

270
• “LABEL EDITOR R02” computer program,
• "RAD-KEY" computer program,
• "PW-WIN" computer program.
44. TECHNICAL PARAMETERS
PUE HY10
Housing
Stainless steel
IP rating acc. to PN-EN 60529
IP68 / IP69
Display
10,1” – widescreen display
1024 x 600 + capacitive touch screen
Power supply
100-240VAC 50-60Hz
Optional power supply
External 12-24VDC
Operating temperature
-10°C ÷ 40°C
OIML
III
Verification units quantity
6000
Max input signal
19,5mV
Max voltage per verification unit
3,25µV
Min voltage per verification unit
0,4µV
Min load cell impedance
50 Ω
Max load cell impedance
1200 Ω
Load cell power supply
5V
Load cell connection
4 or 6 wires + shield
Weighing platforms quantity
Standard 1, max.2
RS232x2
M12 8P hermetic connector
USBx2
M12 4P hermetic connector
USB A hermetic connector
Ethernet
10/100Mb, RJ45 hermetic connector
IN/OUT
4IN – M12 8P connector
4OUT – M12 8P connector
OPTIONAL EQUIPMENT
IN12 module
12IN/12OUT – gland
ANxxxx module
Current loop 4-20mA, 0-20mA,
Voltage loop 0-10V
Profibus module
2x M12 5P B-coded connector
RS485 module
Cable through gland
RS232x1
M12 8P hermetic connector