List of data for a selected report from dosing:
Status
Status of correctness for a completed dosing process
Start date
Start date of dosing process
End date
End date of dosing process
Dosing process
Name of completed dosing process
Operator
Operator preparing a dosing process
Client
Client for which the dosing process is prepared
Number of
Measurements
Number of measurements within a completed dosing
process
35.5.3. Reports from recipes
Procedure:
• Enter < Reports> according to ch. 35 of this manual,
• Enter <
Report from formulation> and press the required position.
List of data for a specific report from a formulation:
Status
Status of correctness for a completed formulation
Start date
Start date of formula making process
End date
End date of formula making process
Formulation
Name of completed formulation
Operator
Operator preparing a formulation
Client
Client for which the formulation is prepared
To Next Page
Loading...
