19.2. Date and time
Default settings allow a logged-in Administrator to change settings of date
and time. Software however allows to change the access level to this option:
<
Date and time>.
Procedure:
• Enter parameters’ group < Authorization> according to ch.
19 of the manual, choose <
Date and time>, and then set
the parameter.
Accessible authorization levels:
None, Operator, Advanced Operator, Administrator.
Caution:
Setting <None> allows free access to settings of date and time
(without the need of Loggingg in).
19.3. Printouts
Default settings of the scale allows a logged on Administrator to edit
printout templates. Software allows to change the access level to option
<
Printouts>.
Procedure:
• Enter parameter group < Authorization> according to ch. 19
of this manual, choose <
Printouts>, and set appropreately.
Access levels to printouts that can be set:
None, Operator, Advanced Operator, Administrator.
Caution:
When you choose setting <None> printout templates can be changed
even without Loggingg on.
To Next Page
Loading...
