• Pressing the button causes displaying a Logging
in window <Insert Password> with the name of previously logged
operator.
• After entering a correct password and accepting it by pressing
key
the scale automatically returns to the control process in progress.
30.8. Non-destructive average tare control mode
Before starting the control process the user can determine average tare by
weighing packages. The option is enabled by activating a function <
Average Tare Estimation> in the PGC mode settings.
Tare control process is accompanied by below window:
Where:
Product
- Product name
Code
- Product code
-
0,25T criterion value in [g]
To Next Page
Loading...
