Caution:
In case a pen drive is not recognized after entering <
Export database
of weighments to a file> a message is displayed: <Operation failed>.
• After the operation has been completed: „Operation finished
successfully” is displayed together with the file name
(with extension *.txt) created on the pen drive,
Caution:
The file name consists of a database name and scale factory number,
e.g. <Weighments_239800.txt>.
• Disconnect the pen drive to USB.
File template:
The created file comprises a table with columns separated by tabulation
characters <Tab> in case to allow direct export to a spreadsheet <Excel>. The
table features all data on a completed weighment record declared in
the submenu: „
Export database of weighments to a file / Data
selection”.
35.4.5. Counter of weighments records
The counter of weighments records contains global number of completed
weighments records carried out on the scale. The user can edit the counter
of weighments records.
Caution:
Access to the editing of the <
Weighing counter> is conditioned
by the accessibility settings for this parameter.
Editing procedure:
• Enter submenu < Reports> in accordance with point 35 of the user
manual,
To Next Page
Loading...
