RADWAG PUE HY10

112
Insensibility
threshold
Permissible error ± of dosed-out mass, given
as a percentage [%]
Minimal flow
Minimal flow value given as [g/s] or [kg/s] for an
initiated algorithm of gravitational dosing
Weighing in minus
Allows for turning on weighing in minus mode
28.5. Creating a new dosing process
Creating a new dosing process is initiated by specifying its name and code,
followed by determining processes on each of the weighing platforms.
Procedure:
• Press key and select option < Databases> from main menu 
then select <
Dosing processes>,
• In order to create a dosing process, press <
Add> key, and confirm
creating a new record in dosing process database,
• Specify name < > and code < > by pressing corresponding hot
keys, and inserting a name and a code using an on-screen keyboard,
• Select weighing platform on which the dosing process is created,
e.g.: <
Platform 1>.
• By pressing <
Add> key design a sequence of the dosing process
to be carried out on a weighing platform no. 1, and next select one of
available process functions (see table in section 28.4).
• There is a possibility of modifying an already designed process –
adding or deleting a single step in a process, e.g.: in order to add an
element in a process, press and hold for 4 seconds an element before
which a new step should be added. Drop-down menu with available
options is displayed
Edit
Add
Delete
Cancel
• Press “Add” and define new element of the process.