Procedure:
• Enter < Communications> parameter group as described
in chapter 15 of this manual,
• Go to <
Wi-Fi / Available networks> submenu and select
determined network out of the list,
• In order to search for available networks again, select <
Refresh>
option.
Caution:
Pictogram located next to the network name, informs whether the network
requires password or not (pictogram with a padlock).
15.4.3. Transmission parameters
Procedure:
• Enter < Communications> parameter group as described
in chapter 15 of this manual, select <
Wi-Fi> and set particular values.
For Wi-Fi the scale software provides the following transmission parameters:
DHCP
Yes, No
IP Address
192.168.0.2
Subnet mask
255.255.255.0
Default gateway
192.168.0.1
DNS
192.168.0.1
Mac address ---
Caution:
1. The above settings serve only for information purposes. Transmission
parameters must be set in order to comply with customer’s local network
settings.
2. <MAC address> parameter is assigned to a particular device
automatically and it is characterised with <Read only> attribute.
To Next Page
Loading...
