21.8. Permissible quantity of unsuccessful logging
The program features option for locking particular operator logging, the
operator is locked after specified number of logging operations has been
performed by him/her.
Procedure:
• Enter submenu < Others> according to ch. 21 of this manual,
• Select < Permissible quantity of unsuccessful logging> parameter,
respective window opens, an on-screen keyboard is displayed,
• Enter specified value and press
to confirm.
When the operator has logged in for specified number of times the following
message is displayed:
< Operator blocked>.
21.9. Logging in required
< Logging in required> parameter must be active if a logging operation
is to be carried out by an operator after the device have been turned on.
Procedure:
• Enter submenu < Others> according to ch. 21 of this manual, select
<
Logging in required> parameter and then set the appropriate
option.
Where:
Inactive logging required
21.10. Start logo
Submenu < Start logo> allows to substitute a “start” graphic file of a scale
with another one located on a memory stick.
To Next Page
Loading...
