Procedure:
• For a chosen button set one of three functions:
Select an identification process
Select an identification process by name
Select an identification process by code
• Go back to the main window,
• Press programmable button and select an appropriate identification
process to activate it.
36.3.2. Activation by operator logging
User may assign an identification process to an operator. It results in automatic
start of a process right after the logging procedure has been carried out.
Procedure:
• Enter submenu: „ Databases / Operators” and select an
appropriate position,
• Go to < Identification process> field and select a demanded
process, than go back to the main window.
• Log in as an earlier edited operator, and wait for an automatic activation of
an identification process assigned to this operator to proceed.
36.3.3. Activation by product selection
User may assign an identification process to a product. It results in automatic
start of a process right after a product has been selected out of a database.
Procedure:
• Enter submenu: „ Databases / Products” and select an
appropriate position,
• Go to < Identification process> field and select a demanded
process, than go back to the main window,
To Next Page
Loading...
