48.5. Attributing a label to a client
Procedure:
• Enter < Databases> according to ch. 34 of this manual,
• Enter <
Clients> and press the required item,
• Enter <
Label>, then the database of labels is open with the list
of all labels,
• Choose the required label. The program automatically ascribes the
label to the client.
48.6. Printing labels
Procedure:
• While in the main window choose a product (button )
or a client (button
) that has attributed a label,
• Place a load on the pan and wait for
then press ,
• The label is printed on a printer connected to the scale.
Caution:
1. Labels can be attributed to products or/and clients. After pressing
a label is printed on a connected printer, provided a selected client or
product has an ascribed label.
2. Users can perform the test label printout – see ch. 34.5 of this
manual.
49. APPENDIX 04 - CITIZEN printer setting
Baud rate : 9600b/sec
Parity control : No
Number of data bits : 8bit
Number of stop bits : 1 bit
Flow control : No
IEEE 1284 : ON
To Next Page
Loading...
