RADWAG PUE HY10

219
• Out of a database select an earlier edited product, and wait for
an automatic activation of an identification process assigned to
this operator to proceed.
36.3.4. Example of process forming and its realization
Description:
User must get through the following balance operation algorithm:
1. Carry out the operator logging process with the use of a transponder card,
2. Give a shift number,
3. Zero scales,
4. Information window „Prepare a product to be weighed” (message 60[s]),
5. Select a product by EAN code, use a barcode scanner,
6. Give a present price of a product,
7. Out of a list select „Country of origin”,
8. Select client code,
9. Out of a list select „Supplier country”,
10. Give a lot number,
11. Give a batch number,
12. Information window „Start a weighing process”.
Identification process forming:
• Create a new record < Identification process> according to point
36.1. of this manual,
• Go to submenu < Process creator> to create further steps of the
process:
Step Function Description
1. Add custom variable
Variable type: numeric variable;
Name: shift number; assign to
custom variable 1
Displays „Shift number” dialog window
for edition with a numeric keyboard
2. Zero Zero Automatic zeroing
3. Delay
Time: 60s; Description: Prepare
a product to be weighed
Displays window „Prepare product to
be weighed” for 60 seconds
4. Select item from
database
Database: Product; selection
mode: Standard; start position:
1; end position: 0
Displays list of products. Configuration
and selection of data with the use of
barcode scanner is described in point
16.3 of this manual.