Switching between the II range and I range is automatic both in the
switching point the autozero zone.
While in AUTOZERO – pictogram appears. Then pictogram
is off and a scale returns to weighing in the I range.
13.5. Toggling between weighing units
Operators can change the weight unit in two ways:
• Pressing the unit symbol on the screen,
• Pressing formerly defined button <
Change unit>.
Possible selection:
• gram [g]
• kilogram [kg]
• carat [ct]
• pound [lb]
• ounce [oz] *
• Newton [N] *
*) – weighing unit inaccessible in a verified scale
Caution:
1. The user can also declare the start unit and determine two custom
weighing units (user defined) – see point 20 of this user manual;
2. The procedure of attributing functions to buttons is described in ch.
17.2 of this manual.
To Next Page
Loading...
