• Enter a value and confirm by pressing ,
• At the same time the weight unit is changed to (w %).
28. WORKING MODES - DOSING
< Dosing> mode enables carrying out filling and dosing processes of goods
on scales featuring an indicator PUE HY10 series. The working mode enables
manual and automatic dosing on a single or simultaneously
on many weighing platforms.
28.1. Starting the working mode
Procedure:
• While in main window of the software, press on-screen key,
located in the top bar of the window, which opens submenu
<Working Modes> containing the list of available working modes,
• Select working mode < Dosing>, the software automatically returns
to displaying the main window, and the top bar indicates the pictogram
of a selected working mode
,
• Automatically the following on-screen key are enabled:
Local parameters
Select dosing process
Start dosing process
Stop dosing process
Emergency stop
To Next Page
Loading...
