RADWAG PUE HY10

257
41. PROFIBUS COMMUNICATION MODULE
Profibus Communication Module ensures data exchange between a
supervising controlling device (master) and a scale (Slave) in accordance
with the Profibus DP protocol.
The supervising unit enables:
• Cyclic reading in input signals from an indicator PUE HY10 series,
• Cyclic saving outputs status to an indicator PUE HY10 series.
Profibus communication functionality with the indicator PUE HY10
enables:
• Operation of four weighing platforms,
• Tarring,
• Zeroing,
• Setting tare value,
• Setting the value of LO limit,
• Setting the value of Min threshold,
• Setting the value of Max threshold,
• Reading inputs status,
• Setting outputs,
• Selecting an operator,
• Selecting a product,
• Selecting a client,
• Selecting a packaging,
• Selecting a source warehouse,
• Selecting a destination warehouse,
• Selecting a formulation,
• Setting lot number,
• Process stopping,
• Process starting,
• Saving / Printing,
• Statistics zeroing.
41.1. Socket topology
The indicator is equipped with input socket and output socket. At the output
socket the power supply voltage is 5VDC, value required for proper indicator
operation. M12 5 pin sockets with B coding are used (type intended for
PROFIBUS DP).