Caution:
For detailed overview of memory map and of variables of Modbus RTU
communication protocol go to chapter 38 of this manual.
16.7.1. Communication port
Procedure:
• Enter < Devices> parameter group as described in chapter 16
of this manual, select „
Modbus RTU / Port” and set respective
value.
Available values:
• None,
• RS232 (1),
• RS232 (2),
• TCP.
16.7.2. Address
Procedure:
• Enter < Devices> parameter group as described
in chapter 16 of this manual.
• select „
Modbus RTU / Address” and wait to see <Address>
window featuring an on screen keyboard.
• enter determined address and press
button to confirm.
16.8. Advanced settings
< Advanced settings> submenu enables declaration of printers
cooperation with scales, cooperation of 1-3 printers may be declared.
To Next Page
Loading...
