Caution:
The user can customize report template, to customize the template go to:
„
Devices / Printer / Printouts
/
Differential weighments reports template” (read section 16.2.3
of this user manual).
Report on each completed differential weighing process is recorded in <
Differential weighments> database. File name features date and time of
weighing operation performance. For list of data for differential weighing
read section 35.5.8 of this user manual.
24.9. Peak hold
The scale enables measuring the maximum force influencing the weighing pan.
Procedure:
• Enter < Working modes> parameter group as described
in chapter 24 of the manual,
• Enter the required working mode and choose <
Peak hold> and then
set the required option.
Where:
Scale operates in standard weighing mode
-
Scale operates with mode forcing lock of maximum indication
on the display, i.e. peak hold.
• On loading the weighing pan with changeable force, the displays locks the
indication of the maximum measured force. The locked value is signalled
by red colour of the displayed value.
• Remove load from the weighing pan.
• Before carrying out the following measurement press
button.
To Next Page
Loading...
