Procedure:
• Enter parameters group <
Working Modes> according to ch. 24
of this manual,
• Enter the required working mode and choose: „
Labelling mode /
No. of CC labels”, then the editing field <No. of CC labels>
with the screen keyboard is opened,
• Enter the required number of cumulative labels and confirm
by pressing
.
24.6.4. Automatic triggering of cumulative labels
Users have access to the function of automatic triggering of printing cumulative
labels after setting parameters <
Mode> and
<
Threshold>.
Procedure:
• Enter < Working modes> parameter group as described
in chapter 24 of the manual,
• Enter the required working mode and choose: „
Labelling mode /
C label automatic triggering / Mode” and then set the required
option:
Cumulative label printout is initiated by pressing
or
*
,
Cumulative label printout is initiated by exceeding the
value set in parameter < Threshold>. The value
is treated as the total from single weighment,
Cumulative label printout is initiated by exceeding the
value set in parameter < Threshold>. The value
is treated as the number of single weighment.
*) Manual printing of cumulative labels can be done in two ways
depending on the button used:
To Next Page
Loading...
