b) Hold your finger on a selected product from the <Products> list, context
menu is displayed,
c) Choose option <Ascribe standard>, then the standard unit mass
is attributed to the product in the field <Mass>.
Caution:
Attributing a standard to a selected product is also possible by
programmable button. Setting programmable buttons is described in ch.
17.2 of this manual The list of functions is described in APPENDIX 02
of this manual.
27. WORKING MODES – PERCENT SETUP (DEVIATIONS)
The program allows to check weighments in deviations (in %) around an
outlined standard mass. The standard mass can be outlined by weighing
or entering it by a user.
27.1. Starting the operating mode
Procedure:
• While in the main window press in the top bar of the window then you
will see a submenu <Working Modes> comprising a list of modes,
• Choose mode <
Deviations>, the program will automatically
returns to the main window displaying icon
in the top bar,
• Measuring unit is automatically changed to „%”, special on-screen buttons
are activated:
Enter reference mass
Estimate reference mass
27.2. Local settings of the working mode
Local settings of the working mode < Deviations> are accessible
on pressing a hot key <
Local parameters>:
To Next Page
Loading...
