3. When setting <DHCP> parameter to value and restarting the device,
the remaining parameters are characterized with <Read only> attribute.
• With modifications carried out press
button, the following message
is displayed <Restart to apply the changes>,
• Enter weighing mode and restart the device.
16. DEVICES
16.1. Computer
The scale can cooperate with a computer. Active connection scale-computer
is signalled by icon
in the top bar of the main window. In submenu
<
Computer> some settings needs to be configured for cooperation
with computers.
Enter submenu <
Computer>, press and then: „ Devices /
Computer”.
16.1.1. Computer port
Procedure:
• Enter parameters’ group < Devices> according to ch. 16 of this
manual,
• Select „
Computer / Port” and then set the appropriate option.
The scale can communicate with a computer via following ports:
• RS232 (1),
• RS232 (2),
• Tcp.
To Next Page
Loading...
