16.1.2. Computer address
Procedure:
• Enter < Devices> parameter group as described in chapter
16 of the manual,
• Choose „
Computer / Address” then the window <Address>
with the screen keyboard appears,
• Enter the required address and confirm it by pressing
.
16.1.3. Continuous transmission
Users can enable continuous transmission from the scale to a computer.
Setting parameter <
Continuous transmission> starts subsequent
sending data from <
Weighing Printout Template> set in submenu:
„Setup /
Devices / Computer / Weighing Printout Template”.
Procedure:
• Enter parameters’ group < Devices> according to ch. 16 of this
manual,
• Choose „
Computer / Continuous transmission” and then
set an appropriate value.
Accessible settings:
Continuous transmission off
Continuous transmission on
16.1.4. Weighing printout template
Users in parameter < Weighing Printout Template> can define
variables included in the printout from the scale to a computer.
To Next Page
Loading...
