RADWAG PUE HY10

185
34.7. Database edit window
The database edition can be performed by an administrator.
34.7.1. Operators’ database
Procedure:
• Enter <
Databases> according to ch. 34 of this manual,
• Enter <
Operators> and press the required position.
Record of operator:
Name
Operator name
Code
Operator code
Password
Password to log on (max. 16 characters)
Access level
Authorization access level
Card number
Transponder card reader for Logging on
Working modes
Assigning a working mode to an operator
Automatically
Automatic mode: Logging out a user
automatically enables a working mode recently
enabled by this user
Change working
mode
Permanent assigning a specific working mode
to a logged operator. Setting “None” disables
the function.
Identification
process
Assigning an identification process to a logging
operator
34.7.2. Database of products
Procedure:
• Enter < Databases> according to ch. 34 of this manual,
• Enter <
Products>and press the required position.