29.4. Formula making process
Starting the
formula making process requires that the authorization (access
level) of the logged user is sufficient to start the process.
Caution:
1. Starting the process requires that the logged user has access level at least
of an <operator>. If the logged user or anonymous operator have access
level set to <none> then on process start the software displays
a message: <Unauthorized access >.
2. The Logging procedure is described in point 11 of this user manual, and
the procedure of determining the access level for scale users is described
in point 19 of this user manual.
• Press an on-screen button
to select a required formulation.
• Enter to scale’s memory general parameters on the working mode
(in accordance with point 29.2of this user manual),
• After returning to the main window of the <
Formulation> mode press
the on-screen function key
(process start),
• If the ingredient control mode is enabled, then the scale software opens an
editing window <Ingredient control> with a numeric keyboard and
an editing field for entering a correct code of the weighed ingredient using
a barcode scanner. Weighment of each following ingredient
requires giving its corresponding code.
In case when:
1. The inserted code of the current ingredient is incorrect, and the ingredient
is in formulation composition, the software displays the following message:
<Incorrect Ingredient Code. Ingredient already in formulation
content. Go to this ingredient?>. Accept this message by pressing
key. The software goes to the weighing process of the ingredient. If
key is pressed, the software returns to displaying the editing
window <Ingredient control > featuring the numeric keyboard for entering
the correct code of an ingredient.
To Next Page
Loading...
