Weighing 2
Mass value of the 2 measurement
Weighing 3
Mass value of the 3 measurement
Pycnometer mass
Value of pycnometer’s mass utilized during
density determination process
Pycnometer density
Value of pycnometer’s volume utilized during
density determination process
35.5.5. Controls reports
Every control procedure performed on the scale is sent to a printer and
saved in database <
Controls Reports>. Every saved control has its
unique number given at the moment it is completed.
Control number pattern:
X / y y / M M / d d / H H / m m / s s, where:
X - Controle mode:
U – regulation compliant control,
W – Internal control
Z – control terminated by an operator,
yy – the last two digits of year,
MM - month,
dd - day,
HH - hour,
mm - minute of control completion,
ss - second of control completion.
Users can view data from subsequent controls.
Procedure:
• Enter submenu < Reports> according to ch. 35 of this manual,
• Enter database <
Controls Reports> and choose a required one.
To Next Page
Loading...
