30.4. Editing a product to be controlled
A product is edited in submenu “ / Databases”.
Caution:
In case the scale cooperates with a computer software <
E2R System>
editing the databases from the scale level is blocked. Editing and exporting
product records to the scales is carried out from the level of computer software.
Procedure:
• Enter submenu “
/ Databases”,
• Enter database < Products> and press required product record.
List of data definable for a control:
Pictogram Data name Description
Name
Product name
Code
Product code
Mass
Product nominal mass
Tare
Product tare value (set automatically on
selecting a product from the database)
PGC
-
PGC mode
Control type: Non-destructive Average Tare,
Non-destructive Empty-Full, Destructive Full-
Empty, Destructive Empty-Full
Lot size
Declaring quantity of a controlled batch
(Maximal value 999999)
Charge
Measuring series to be controlled: Non-
destructive Empty-Full, Destructive Full-Empty,
Destructive Empty-Full
Unit
Product’s weighing unit: [g] or [ml]
Density
Product density (range of entered values has
to contain between 0,1g/cm
3
and 5g/cm
3
)
To Next Page
Loading...
