RADWAG PUE HY10

58
17.5.1. Bargraph type
To declare bargraph type go to: “ Display / Bargraph” /
Bargraph Type” submenu.
Accessible bargraphs:
• None (Bargraph is not displayed),
• Fast weighing,
• Signalling checkweighing ranges,
• Linear,
• Control *.
*) – intended for „PGC” and „SQC” working modes exclusively, remaining bargraph
types for these mode are inaccessible.
17.5.2. Bargraph “Fast weighing”
Setting of bargraph type “Quick weighing” are accessible in submenu
„
Display / Bargraph / Quick weighing”:
MIN, MAX thresholds working
mode
Stable – signalling of MIN, MAX thresholds
is previewed on exceeding LO threshold
and reaching stable measurement result;
Unstable – signalling of MIN, MAX thresholds
is previewed on exceeding LO threshold
OK threshold working mode
Stable – signalling of OK thresholds is
previewed on exceeding LO threshold
and reaching stable measurement result;
Unstable – signalling of OK thresholds is
previewed on exceeding LO threshold
Min threshold signalling colour
Colour selection for signalling MIN threshold.
18 colours palette available.
OK threshold signalling colour
Colour selection for signalling OK threshold.
18 colours palette available.
Max threshold signalling colour
Colour selection for signalling MAX threshold.
18 colours palette available.
Gradient
Enabling / Disabling filling effect “Gradient”
type.
Background colour
Colour selection of a bargraph background.
18 colours palette available.
Frame colour
Colour selection of bargraph frame.
18 colours palette available.