Procedure:
• Enter parameters group < Working Modes> according
to ch. 24 of this manual,
• Enter the required working mode and choose <
Down-weighing>
and then set the required option.
Accessible options:
- Traditional weighing
24.4. Checkweighing
In case of enabling the checkweighing mode, printouts are performed only
when a weighing is between MIN and MAX thresholds that have been
defined before.
Procedure:
• Enter parameters group < Working Modes> according to ch. 24
of this manual,
• Enter the required working mode and choose <
Checkweighing>
then set the required option.
Options:
Every weighing is recorded
- Only weighments between MIN, MAX are recorded.
24.5. Tare mode
This function enables users to set parameters for tarring.
Procedure:
• Enter parameters group < Working Modes> according to ch. 24
of this manual,
To Next Page
Loading...
