24.10. Information about saved measurement
The user can activate message informing on the fact that a particular weighing
result has been recorded in a database, the message is displayed each time
after performed measurement.
Procedure:
• Enter submenu < Working modes> according to ch. 24 of this
manual,
• Enter „Weighing” mode and activate option: < Information about
saved measurement>,
• Each time after completed measurement the message <Measurement
saved> is displayed.
Caution:
The message is displayed as long as value of <
Error information preview
time> parameter specifies (read point 21.12 of this manual).
24.11. Packaging quantity query
The user can use packaging weight multiplier function. To do it parameter:
<
Ingredient weight entered manually> must be activated.
Procedure:
• Enter submenu < Working modes> according to ch. 24 of this
manual
• Enter „Weighing” mode and activate option: <
Ingredient weight
entered manually>,
• Each time the user selects record of particular packaging stored within
a database of packages, <Enter no. of packages> window with an on
screen keyboard is displayed,
• Upon entering particular packaging quantity value, weight value equal
to declared multiplied value of packaging is displayed along with Net and
symbols.
To Next Page
Loading...
