RADWAG PUE HY10

54
• “Chart”
 Combining programmable screen 1 and 2
 Combining programmable screen 3 and 4
• “Workspace”
 Combining programmable screen 1 and 2
 Combining programmable screen 3 and 4
 Combining programmable screen 1 and 3
 Combining programmable screen 2 and 4
• “Databases”
 Combining programmable screen 1 and 3
 Combining programmable screen 2 and 4
Notice:
Combining programmable screens is conditioned by the following:
• For „Mass” component it is necessary to declare the same platform
number;
• For „Bargraph” component it is necessary to declare the same platform
number;
• For „Workspace” component it is necessary to declare the same display
layout;
17.2. Mass
< Mass> component is a window containing information on weighing:
Procedure:
• While operating a particular working mode, enter < Display>
submenu following instruction provided by section 17.
• Enter <
Display components> submenu and select particular
screen component,
• Run <
Mass> component.