Type of variable
Declaration of type of product variable, which is to
be edited: mass, price, number of days left before
the expiry date, additional days of expiry period
Outputs
Function setting indicator outputs state, for control
of peripherals. Possible values: None: - inactive
output; „0” – low output state; „1” – high output
state.
Delay
Function setting intervals between steps of a
dosing process. Function defines amount of time
interval until the next step of a process, given in [s].
Input condition
Conditional function, determines when the next
step of a process is to be executed, it depends on
an input state of an indicator. Possible values:
None – inactive input; „0” - low input state; „1” –
high input state; „/” – rising edge on input (change
from low state to high state, e.g.: the moment of
pressing a button); „\” – trailing edge (change from
high state to low state, e.g.: the moment of
releasing a button)
Edit universal variable
Function activating edition of universal variable
Assign to universal
variable
Assigning a universal variable to an appropriate
universal variable in reports (database). Values:
from 1 to 3.
Button functions
Activating determined button function.
Operation
Selecting button function.
36.3. Identification process – activation procedure
Identification processes may be activated by:
• Programmable button,
• Operator logging,
• Product selection.
36.3.1. Activation by programmable button
Submenu < Button functions> allows for free configuration
of programmable buttons (see point 17.2 of this manual).
To Next Page
Loading...
