17.4. Function keys
< Button functions> submenu is designed to enable screen buttons
programming. The buttons are programmed individually for each of the working
modes. Particular button gets activated when a specified function is assigned
to it. The button stays inactive when no function is assigned to it.
Procedure:
• While in optional working mode go to submenu < Display>
in accordance with point 17 of this user manual
• Select <
Button functions> and enter particular screen submenu
(1, 2, 3 or 4)
• Set particular option for the given screen button.
< Set default> function is designed to enable setting of default values
for programmable buttons for a particular working mode.
Caution:
The list of functions that can be attributed to keys or buttons is listed
in APPENDIX 02 of this manual.
17.5. Bargraph
A bargraph is a typical visualization procedure. It helps in quick weighing.
It requires less concentration to read if a weighing is between minimum
and maximum thresholds. To access bargraph settings go to
“
Display / Bargraph” submenu.
Notice:
<
Set default> function is designed to enable setting of default parameters
for bargraph for a particular working mode.
To Next Page
Loading...
