• After downloading the update press an active key which
is followed by displaying a message:
• Accept the message by pressing
key. The indicator shall restart
with update installing procedure.
23.2. Update from pen drive
Procedure:
• Copy file “update.hy10” containing the current software version onto the
external data storage device (to the main catalogue),
• Connect the data storage device to indicator’s USB port,
• Go to submenu <
Update> in accordance with point 23 of this user
manual,
• Go to parameter <
Update From pen drive> which displays the
following message: “Update?”,
Caution:
In case the data storage device is not connected to the indicator’s USB
port and/or there is no „update.hy10” file in the main catalogue of the pen
drive, the software displays the following message “Update error”.
To Next Page
Loading...
