33.2. Working mode local settings
The local settings of working mode < Vehicle Scale> are accessed
by pressing an hot-key <
Local settings>:
Default transaction
type
Selecting a default transaction type. Available
settings: Entrance, Exit, Control weighment.
Select vehicle
Declaring the means for selecting a vehicle.
Available options: From list, From hand, By name,
Print report
Enabling automatic report printout on completing
a vehicle transaction.
33.3. Vehicle transaction course
Starting a vehicle transaction, requires that a logged operator features
appropriate access level for carrying out the transaction.
Caution:
In order to start a transaction, the access level of a logged user must be at
least <operator>. IF the logged user or anonymous user feature access level
<none> then on starting a transaction the software displays a message:
<No authorization>.
An operator can carry out three types of transactions:
• Entrance,
• Exit,
• Control weighment.
33.3.1. Entrance / Exit transaction
Changes of transaction type are carried out by pressing , where:
Entrance transaction
Exit transaction
To Next Page
Loading...
