RADWAG PUE HY10

191
List of data for a selected identification process:
Name
Identification process name
Code
Identification process code
Repeat the process
Enables an already initiated identification process
to be performed in a cyclic manner
Process creator
Submenu used for defining (creating) an
identification process
34.7.9. Database of packages
Procedure:
• Enter < Databases> according to ch. 34 of this manual,
• Enter <
Packages> and press the required position.
Package record:
Name
Package name
Code
Package code
Mass
Package weight (set automatically after choosing
after choosing a package from the database)
34.7.10. Database of warehouses
Procedure:
• Enter < Databases> according to ch. 34 of this manual,
• Enter <
Warehouses> and press the required position.